. When light hits an object, how do we recognize the color? — CM, Levering, PA
White light is a mixture of various light waves with different wavelengths and thus different colors. When white light hits an object, some of the light waves are absorbed while others are not. The light that isn't absorbed may pass through the object or it may be reflected in a new direction. The light that you observe coming from the object is this transmitted or reflected light. If the light that you see doesn't include the same mixture of wavelengths that first hit the object, you won't see this light as white. Instead, you'll see it as colored. If the light you see contains mostly long wavelengths of light, you'll see it as red. If the light contains mostly short wavelengths of light, you'll see it as blue or violet. The wide range of colors that objects have comes from subtle differences in the wavelengths of light they absorb. However, when an object is illuminated with colored light, the light that it transmits or reflects may be altered. After all, it can't transmit or reflect a light wave that never hit it in the first place. Even variations in "white" light can affect an object's color—makeup looks different in incandescent "white" light than it does in fluorescent "white" light because those illuminations contain different mixtures of light waves.
. What is the scientific explanation of a rainbow? — RS, Salinas, CA
A rainbow is caused by three important optical effects: reflection, refraction, and dispersion, all working together. The rainbow forms when sunlight passes over your head and illuminates falling raindrops in the sky in front of you. This sunlight enters each spherical raindrop, partially reflects from the back surfaces of the raindrop, and then leaves the raindrop and heads toward you. The raindrop helps some of the sunlight make a near U-turn. But the path that the light follows after it enters the raindrop depends on its color. Light bends or "refracts" as it changes speed upon entering water from air and the amount it bends depends on how much its speed changes. Since violet light slows more than red light, a phenomenon called "dispersion," the violet light bends more than the red light and the two colors begin to follow different paths through the drop. All the other colors are spread out between these two extremes.
The colored rays of light then partially reflect from the back surface of the raindrop because any change in light's speed also causes partial reflection. Now the various colors are on their way back toward you and the sun. The light bends again as it emerges from the raindrop and the various colors leave it traveling in different directions. Only one color of light will be aimed properly to reach your eyes. But there are other raindrops above and below it that will also send light backward and some of that light will also reach your eyes. But this light will be a different color. What you see when you observe the rainbow is the lights that many different raindrops send back toward your eyes. The upper raindrops send their red light toward your eyes while the lower raindrops send their violet light toward your eyes. You see a series of colored bows from these different raindrops.
. What is light? — KB, Winnipeg, MB
Light consists of electromagnetic waves. An electromagnetic wave is a self-sustaining disturbance in the electric and magnetic fields that can exist even in empty space. You have probably seen two electrically charged objects push or pull on one another, such as when a sock clings to a shirt as you pull the two from the clothes dryer. You have probably also seen two magnetically poled objects push or pull on one another, such as when a magnet pulls itself toward a refrigerator door. These electric and magnetic forces are mediated by electric and magnetic fields respectively and, while those fields certainly exist in the space between the sock and shirt or between the magnet and refrigerator, they can also exist all by themselves. In an electromagnetic wave, the electric field creates the magnetic field and the magnetic field creates the electric field so that these two fields go on creating one another indefinitely as the wave travels through space at an enormous speed—the speed of light. Electromagnetic waves are distinguished by their frequencies or wavelengths, characteristics that are familiar to anyone who has watched water waves approaching the beach. But only a certain group of electromagnetic waves are visible to our eyes—those with frequencies between about 4.0*1014 cycles per second and 7.5*1014 cycles per second (wavelengths between about 750 nanometers and 400 nanometers). Outside of this range are infrared light at the low frequency end and ultraviolet light at the high frequency end.
. How do scientists measure the speed of light? — DZ, Illinois
There are many possible methods for measuring the speed of light, but the classic technique is easiest to describe. In this method, a rapidly spinning mirror is used to direct a beam of light down a long pipe toward a stationary mirror at the end of that pipe. The first mirror is spinning in such a way that the beam it reflects sweeps across the pipe and can only strike the second mirror during that brief moment when the first mirror is perfectly aligned to direct the light down the pipe. A scientist then looks into the spinning mirror to observe the flash of light that returns from the second mirror. Because it takes a small but finite amount of time for the light to travel back and forth through the pipe, the spinning mirror will have turned a little between the moment when it sent the beam of light toward the far mirror and the moment when that beam of light returns to the spinning mirror. By studying the angle at which the reflected beam leaves the spinning mirror and by knowing how quickly the mirror is spinning, the scientist can determine the speed of light.
However, something has changed since those sorts of measurements were done: the speed of light is now a defined constant. It isn't measured any more—it's simply defined to be 299,792,458 meters per second. The second is defined in a similar manner—as 9,192,631,770 periods of a particular microwave emission from the cesium-133 atom. Because of these two definitions, an experiment that "measures the speed of light" is now used to determine the length of the meter.
. On really cold winter days at temperatures well below zero, I've noticed that sunlight is brighter and whiter than on days that are a little below freezing. Why does this happen? — CP, Madison, WI
The colder the air is, the less humidity it can hold. That's because at low temperature, water molecules in the air are much more likely to land on a surface and stick than they are to break free from a surface and enter the air. Thus cold air is relatively free of water molecules. Water molecules in the air tend to bind together briefly and form tiny particles that scatter light. The sky is blue because of such scattering from tiny particles. With less water in the air, there is less scattering of sunlight. As a result, the sky is a darker blue, almost black, and the sunlight that reaches you directly from the sun retains a larger fraction of its blue light. The sun appears less red and more blue-white than on a warmer, more humid day.
. Why do we see colors when light strikes atoms? — GN, Marine City, MI
When white light strikes a molecule, that molecule may absorb some of the light. Light interacts with molecules as particles called "photons" and whether a particular photon is absorbed depends on the structure of the molecule and the color of the photon. Each molecule has the ability to absorb only certain colors of light. For example, a particular molecule may absorb only red photons. As a result, your eye will see only green and blue light photons coming from that molecule when it's exposed to white light and you will perceive that molecule as having a blue-green color known as cyan. In general, the colors that you see coming from molecules that are illuminated by white light are the colors of light that the molecules don't absorb.
. How do the 2" diagonal color LCD screens used in some of the new digital video cameras work? — M, Waynesboro, MS
Like most liquid crystal displays (LCD), these devices use liquid crystals to alter the polarization of light and determine how much of that light will emerge from each point on the display. Liquid crystals are large molecules that orient themselves spontaneously within a liquid—much the way toothpicks tend to orient themselves parallel to one another when you pour them into box. The liquid crystals used in an LCD display are sensitive to electric fields so that their orientations and their optical properties can be affected electronically. The liquid crystals in the display occupy a thin layer between transparent electrodes and two polarizing plastic sheets. Light from a fluorescent lamp passes through a polarizing sheet, an electrode, the liquid crystal layer, another electrode, and another polarizing sheet. The orientation of the liquid crystal determines whether light from the first polarizing sheet will be able to pass through the second polarizing sheet. When electric charges are placed on the two electrodes, the liquid crystal's orientation changes and so does light's ability to pass through the pair of polarizing sheets.
To create a full color image, the display has many rows of electrodes on each side of the liquid crystals and a pattern of colored filters added to the sandwich. In "active" displays, there are also thin-film transistors that aid in the placement of charges on the electrodes. Overall, the display is able to select the electric charges on each side of every spot or "pixel" on the screen and can thus control the brightness of every pixel.
. What would things look like if I could see wavelengths of the spectrum other than just visible light (e.g., X-rays, radio waves, ultraviolet, infrared, gamma rays, etc.)? — SH, Hurricane, UT
As you looked around, you would see a general glow of radio waves, microwaves, and infrared light coming from every surface. That's because objects near room temperature emit thermal energy as these long-wavelength forms of light. While we don't normally see such thermal radiation unless an object is hot enough for some of it to be in the visible range, your new vision would allow you to see everything glow. The warmer an object is, the brighter its emission and the shorter the wavelengths of that emission. People would glow particularly brightly because of their warm skin.
You would also see special sources of radio waves, microwaves, and infrared light. Radio antennas, cellular telephones, and microwave communication dishes would be dazzlingly bright and infrared remote controls would light up when you pressed their buttons.
You would see ultraviolet light in sunlight and from the black lights in dance halls. But there wouldn't be much other ultraviolet light around to see, particularly indoors. X-rays and gamma rays would be rare and you might only see them if you walked into a hospital or a dentist's office. Gamma rays would be even rarer, visible mostly in hospitals.
. Why do colors fade in the sun? - RD
While light travels as electromagnetic waves, it's emitted and absorbed as particles called "photons." Each photon carries with it a tiny bit of energy. The amount of energy in a photon depends on the wavelength of the light associated with it. While a photon of red light contains too little energy to cause chemical processes to occur in most molecules, a particle of violet or ultraviolet light contains enough energy to cause significant chemical damage to a typical molecule. Since sunlight contains a substantial amount of violet and ultraviolet lights, it can cause a fair amount of chemistry to occur in the molecules that absorb it. That's why colors often fade in sunlight. Many colored molecules are relatively fragile and are damaged by photons of ultraviolet light. The portion of a dye molecule that gives it its color is called a "chromophore" and is usually the most fragile part of the molecule. Destroying its chromophore will often leave a dye molecule colorless. Exposure to sunlight was the traditional way to bleach fabrics and make them white.
. How does ultrasound detect cracks or imperfections in metal? Is this to do with density or is it just reflecting off surfaces? — PA, Essex, UK
Like all waves, ultrasound reflects whenever it passes from one material to another and experiences a change in speed (or more accurately, a change in impedance). Any inhomogeneity in a metal is likely to change the speed of sound in that metal and will cause some amount of sound reflection. With the proper instruments emitting sound and detecting the reflected sound, it's possible to image the imperfections. The same technique is used in medical ultrasound to image organs or fetuses, and even to image the insides of the earth.