|MLA Citation:||Bloomfield, Louis A. "How Everything Works" How Everything Works 16 Jul 2018. Page 117 of 160. 16 Jul 2018 <http://www.howeverythingworks.org/prints.php?topic=all&page=117>.|
Because the picture tube can't direct its electron beams accurately enough to hit specific red, green, or blue phosphor regions, it needs help from a shadow mask that's located a short distance before the phosphor layer. This thin metal grillwork shades the light-producing phosphors from the wrong electrons. The picture tube has three separate beams of electrons, one for each primary color, and the grillwork ensures that electrons in the red beam are only able to strike phosphors that produce red light. The same goes for the blue beam and the green beam.
The grillwork must stay in perfect registry with the pattern of phosphors on the inside of the picture tube, even as their temperatures change. That's why this grillwork is made of Invar, a special steel alloy that doesn't change size when its temperature changes. Unfortunately, Invar can be magnetized and its magnetic fields can then steer the electrons so that they strike the wrong phosphors. If you were to hold a strong magnet near the face of a computer monitor, you would probably magnetize the Invar shadow mask and spoil the color balance of the images on the monitor.
To demagnetize the Invar, you must expose it to a magnetic field that fluctuates back and forth and gradually diminishes to zero. The Invar's magnetization would also fluctuate back and forth and would dwindle to nothing by the time the demagnetizing field had vanished. Traditionally, this demagnetizing was done with a large wire coil that was powered by alternating current so that its magnetic field fluctuated back and forth. This coil was gradually moved away from the picture tube so that the influence of its magnetic field slowly diminished to zero, leaving the Invar completely demagnetized. In good computer monitors, this coil and an automatic power source for it are built in. When you push the degauss button, you see a burst of colors as the demagnetizing coil's fluctuating magnetic field erases the magnetization of the shadow mask and also steers the electrons wildly.
Apparently, degaussing circuitry has been built into all color televisions sets for the past 20 or 30 years. When you turn on your television, a demagnetizing coil activates briefly and removes minor magnetization from the television's invar mask.
If you don't want to do the polymerization yourself, you can start with a finished plastic and melt it. Most plastics that haven't been vulcanized into one giant molecule (as is done in rubber tires) will melt at high enough temperatures (although some burn or decompose before they melt). These molten plastics can be stretched, squeezed, or poured into molds to make just about any shape you like.
While fusion is somewhat more energy efficient than fission, that's not the whole reason why hydrogen bombs (thermonuclear bombs) are more powerful than uranium bombs (fission bombs). The main reason is that thermonuclear bombs can be much larger than fission bombs because there is no upper limit to the amount of hydrogen you can assemble in a small region of space. In contrast, if you assemble too much fissile uranium in a small region of space, a chain reaction will begin and the material will overheat and explode. At the height of the cold war, the Soviet Union built gigantic thermonuclear weapons with explosive yields as large as 100 megatons of TNT.
However, there are several complications when using this technique to measure a person's temperature. First, anything that lies between the person and you, and that absorbs or emit thermal radiation, will affect your measurement. That's because some of the thermal radiation that appears to be coming from the person may be coming from those in between things. Fortunately, air is moderately transparent to thermal radiation but many other things aren't. In fact, to get an accurate reading of person's temperature, you'd have to cool the telescope and the light detector so that they don't add their own thermal radiation to what you observe. You'd also have to use a mirror telescope because glass optics absorb infrared light.
Second, the temperature that you observe will be that of the person's skin and not their inner core temperature. That's because the person's skin absorbs any infrared light from inside the person and it emits its own infrared light to the world around the person. You can't observe infrared light from inside the person because the person's skin blocks your view. All you see is their skin temperature.
In a sense, probability is destiny. Thermodynamics observes that vast systems tend to evolve toward the mostly likely configurations. To understand this process, consider what happens when you mix hot and cold water. The most likely final configuration for the mixed water is for it to reach a uniform temperature about half way in between the two original temperatures. While it's possible for the water to end up extremely hot in one place and extremely cold in another, that outcome is extremely unlikely. It's so unlikely that it never happens.
So in what sense does thermodynamics overwhelm things? The world is filled with relatively ordered arrangements and these ordered arrangements are unlikely by themselves (how they came to be ordered in the first place is another matter for another questions). If you take a crystal vase and drop it on the floor, it's going to evolve toward a more likely arrangement of atoms and dropping it a second time isn't going to return it toward its original unlikely state. In short, ordered systems naturally drift toward disorder when given a chance. How quickly they drift depends on their situation. A coffee cup will remain a nicely ordered object for thousands or millions of years if you don't disturb it. But in a hot environment, or one that is chemically aggressive, it may not last very long.
One last thought: how do living organisms maintain their order in the face of this tendency to disorder? They do it by consuming order and exporting disorder—they eat ordered foods and release disordered wastes to their surroundings.
That said, a reader notes that the uneven cooking in a microwave oven can lead to bacterial safety problems—if parts of the food aren't heated sufficiently to kill dangerous bacteria, then you could be exposing yourself to those bacteria. He suggests using the microwave oven for reheating only. He also notes that the lack of surface heating leaves the food relatively tasteless, as compared to more conventional cooking.
The basic calculation of critical mass is straightforward in principle, but it requires a thorough understanding of the nuclear fuel. Because you need to know how likely one nuclear fission is to cause a subsequent nuclear fission, you must know both the types of fragments you can expect from the first nuclear fission and the likelihood that each fragment will induce a subsequent fission in another atomic nucleus before that it escapes from the nuclear fuel. Because the range of possible fragments, their kinetic energies, and their paths through the nuclear fuel are so vast, an accurate calculation of critical mass is extremely complicated. As an indication of the difficulty, note that fission fragments may bounce off nuclei without inducing fission, so that you must consider bent paths as well as straight ones. Not surprisingly, the calculation of critical mass is too difficult to do exactly, even with the help of computers. In fact, one of the reasons that Germany didn't develop nuclear weapons during World War II was that its scientists miscalculated the critical mass of a fission bomb based on enriched uranium and thought that they would need many tons of enriched uranium rather than the true critical mass of about 52 kilograms. Certain that a critical mass of enriched uranium was unattainable, they didn't pursue the project.
The How Everything Works Home Page — Printer Friendly
The Complete Collection of Questions (160 prints, from oldest to newest) — Printer Friendly: