MLA Citation: Bloomfield, Louis A. "Question 1560: Is DC power transmission possible?"How Everything Works 18 Aug 2018. 18 Aug 2018 .
1560. In your response to Question 891, you wrote of the advantages of alternating current power transmission. Hasn't lately there been some discussion of going to DC power transmission? I believe it is supposed to have superior operating properties when transmitting power over large distances. I have tried to find the reference, I think I came across the comment either in New Scientist or Scientific American. — JM, United Kingdom
You're right that DC (direct current) power transmission has some important advantages of AC (alternating current) power transmission. In alternating current power transmission, the current reverses directions many times per second and during each reversal there is very little power being transmitted. With its power surging up and down rhythmically, our AC power distribution system is wasting about half of its capacity. It's only using the full capacity of its transmission lines about half of each second. Direct current power, in contrast, doesn't reverse and can use the full capacity of the transmission lines all the time.

DC power also avoids the phase issues that make the AC power grid so complicated and fragile. It's not enough to ensure that all of the generators on the AC grid are producing the correct amounts of electrical power; those generators also have to be synchronized properly or power will flow between the generators instead of to the customers. Keeping the AC power grid running smoothly is a tour-de-force effort that keeps lots of people up at night worrying about the details. With DC power, there is no synchronization problem and each generating plant can concentrate on making sure that their generators are producing the correct amounts of power at the correct voltages.

Lastly, alternating currents tend to flow on the outsides of conductors due to a self-interaction between the alternating current and its own electromagnetic fields. For 60-cycle AC, this "skin effect" is about 1 cm for copper and aluminum wires. That means that as the radius of a transmission line increases beyond about 1 cm, its current capacity stops increasing in proportion to the cross section of the wire and begins increasing in proportion to the surface area of the wire. For very thick wires, the interior metal is wasted as far as power delivery is concerned. It's just added weight and cost. Since direct current has no skin effect, however, the entire conductor can be carry current and there is no wasted metal. That's a big plus for DC power distribution.

The great advantage of AC power transmission has always been that it can use transformers to convey power between electrical circuits. Transformers make it easy to move AC power from a medium-voltage generating circuit to an ultrahigh-voltage transmission line circuit to a medium-voltage city circuit to a low-voltage neighborhood circuit. DC power transmission can't use transformers directly because transformers need alternating currents to move power from circuit to circuit. But modern switching electronics has made it possible to convert electrical power from DC to AC and from AC to DC easily and efficiently. So it is now possible to move DC power between circuits by converting it temporarily into AC power, sending it through a transformer, and returning it to DC power. They can even use higher frequency AC currents and consequently smaller transformers to move that power between circuits. It's a big win on all ends. While I haven't followed the developments in this arena closely, I would not be surprised if DC power transmission started to take hold in the United State as we transition from fossil fuel power plants to renewable energy sources. Using those renewable sources effectively will require that we handle long distance transmission better than we do now and we'll have to develop lots of new transmission infrastructure. It might well be DC transmission.