1494. How do people measure g-forces? I have read articles about roller coasters that report specific numbers, such as 3 g's. How are these numbers obtained? - T
Whenever you accelerate, you experience a gravity-like sensation in the direction opposite that acceleration. Thus when you accelerate to the left, you feel as though gravity were pulling you not only downward, but also to the right. The rightward "pull" isn't a true force; it's just the result of your own inertia trying to prevent you from accelerating. The amount of that rightward "pull" depends on how quickly you accelerate to the left. If you accelerate to the left at 9.8 meters/second2
, an acceleration equal in amount to what you would experience if you were falling freely in the earth's gravity, the rightward gravity-like sensation you feel is just as strong as the downward gravity sensation you would feel when you are standing still. You are experiencing a rightward "fictitious force" of 1 g. The g-force you experience whenever you accelerate is equal in amount to your acceleration divided by the acceleration due to gravity (9.8 meters/second2
) and points in the direction opposite your acceleration. Often the true downward force of gravity is added to this figure, so that you start with 1 g in the downward direction when you're not accelerating and continue from there. If you are on a roller coaster that is accelerating you upward at 19.6 meters/second2
, then your total experience is 3 g's in the downward direction (1 g from gravity itself and 2 g's from the upward acceleration). And if you are accelerating downward at 9.8 meters/second2
, then your total experience is 0 g's (1 g downward for gravity and 1 g upward from the downward acceleration). In this last case, you feel weightless-the weightlessness of a freely falling object such as an astronaut, skydiver, or high jumper.
Note added: A reader pointed out that I never actually answered the question. He's right! So here is the answer: they use accelerometers. An accelerometer is essentially a test mass on a force sensor. When there is no acceleration, the test mass only needs to be supported against the pull of gravity (i.e., the test mass's weight), so the force sensor reports that it is pushing up on the test mass with a force equal to the test mass's weight. But once the accelerometer begins to accelerate, the test mass needs an additional force in order to accelerate with the accelerometer. The force sensor detects this additional force and reports it. If you carry an accelerometer with you on a roller coaster, it will report the force it exerts on the test mass at each moment during the trip. A recording device can thus follow the "g-forces" throughout the ride.
As far as how accelerometers work, modern ones are generally based on tiny mechanical systems known as MEMS (Micro-Electro-Mechanical Systems). Their test masses are associated with microscopic spring systems and the complete accelerometer sensor resides on a single chip.