1131. How would I go about making a camera that's more than just a pinhole camera? — JL, Longview, WA
While a pinhole will project the image of a scene on a piece of film, it doesn't collect very much light. That's why a pinhole camera requires very long exposures. A better camera makes use of a converging lens. If you hold a magnifying glass several inches away from a white sheet of paper, you will see that it forms a real image of anything on the other side of it—particularly bright things such as light bulbs or well-lighted windows. A typical camera uses a converging lens that's not unlike a magnifying glass to form an image of this sort. You could use a magnifying glass to build a camera, but I'd suggest that you start with a camera and rebuild it yourself. Go to a company that processes film and see if they will give you any used disposable cameras. These cameras are of essentially no value to them and they either discard them or recycle them. If you ask around, you should find a photo shop that will give you a couple. You can then disassemble them. You'll find a very nice lens, a shutter system, a film advance mechanism, and so on. You can use a toothpick or small screwdriver to turn the exposure dial backward so that the camera behaves as though it still has film left. You can then "advance the (non-existent) film" by turning the film sensing gears in the back of the camera with your fingers until the shutter cocks. Finally, you can press the shutter release and watch the shutter open the lens to light. Disposable cameras are great because if you break something in your experimenting, you can just throw away your mistake.