How Everything Works   Page 134 of 160 (1595 Questions and Answers) Printer Friendly Version

1331. If there is an upward force on the egg when it hits the table, why doesn't it bounce upward?
The enormous upward force on the egg when it hits the table does cause the egg to accelerate upward briefly. The egg loses all of its downward velocity during this upward acceleration. But the egg breaks before it has a chance to acquire any upward velocity and, having broken, it wastes all of its energy ripping itself apart into a mess. If the egg had survived the impact and stored its energy, it probably would have bounced, at least a little. But the upward force from the table diminished abruptly when the egg broke and the egg never began to head upward for a real bounce.

1332. What effects do forces acting on an object which are not from the same pair have on one another? i.e. the force pulling the egg downward and the potential force of the table? Are they equal upon impact and there a pair?
Different forces acting on a single object are not official pairs; not the pairs associated with Newton's third law of action-reaction. While it is possible for an object to experience two different forces that happen to be exactly equal in magnitude (amount) but opposite in direction, that doesn't have to be the case. When an egg falls and hits a table, the egg's downward weight and the table's upward support force on the egg are equal in magnitude only for a fleeting instant during the collision. That's because the table's support force starts at zero while the egg is falling and then increases rapidly as the egg begins to push against the table's surface. For just an instant the table pushes upward on the egg with a force equal in magnitude to the egg's weight. But the upward support force continues to increase in strength and eventually pushes a hole in the egg's bottom.

1333. I don't understand work done without any acceleration. Since F=ma and a=0, F=0 and thus W=0.
You are merging two equations out of context. The force you exert on an object can be non-zero without causing that object to accelerate. For example, if someone else is pushing back on the object, the object may not accelerate. If the object moves away from you as you push on it, then you'll be doing work on the object even though it's not accelerating. The only context in which you can merge those two equations (Force=mass x acceleration and Work=Force x distance) is when you are exerting the only force on the object. In that case, your force is the one that determines the object's acceleration and your force is the one involved in doing work. In that special case, if the object doesn't accelerate, then you do no work because you exert no force on the object! If someone else is pushing the object, then the force causing it to accelerate is the net force and not just your force on the object. As you can see, there are many forces around and you have to be careful tacking formulae together without thinking carefully about the context in which they exist.

1334. What is thermal energy?
While we ordinarily associate energy with an object's overall movement or position or shape, the individual atoms and molecules within the object can also have their own separate portions of energy. Thermal energy is the energy associated with the motions and positions of the individual atoms within the object. While an object may be sitting still, its atoms and molecules are always jittering about, so they have kinetic energies. When they push against one another during a bounce, they also have potential energies. These internal energies, while hard to see, are thermal energy.

1335. When a rubber ball bounces or rebounds, does the weight of the ball determine how many times it bounces?
Each time the ball bounces, it rises to a height that is a certain fraction of its height before that bounce. The ratio of these two heights is the fraction of the ball's energy that is stored and returned during the bounce. A very elastic ball will return about 90% of its energy after a bounce, returning to 90% of its original height after a bounce. A relatively non-elastic ball may only return about 20% of its energy and bounce to only 20% of its original height. It is this energy efficiency that determines how many times a ball bounces. The missing energy is usually converted into thermal energy within the ball's internal structure.

1336. When an egg falls and hits the table, the table pushes up on it, doesn't it? The same with a bouncing ball?
Yes, when a falling object hits a table, the table pushes up on the falling object. What happens from then on depends on the object's characteristics. The egg shatters as the table pushes on it and the ball bounces back upward.

1337. You discussed how an egg doesn't bounce because it doesn't have time and instead it breaks. Why, then, does a mouse ball (in a computer mouse) or a bowling ball not bounce? It doesn't break, so why doesn't the support force make it bounce back upward. Does this relate to elasticity?
Actually, both a mouse ball and a bowling ball will bounce somewhat if you drop them on a suitably hard surface. It does have to do with elasticity. During the impact, the ball's surface dents and the force that dents the ball does work on the ball—the force on the ball's surface is inward and the ball's surface moves inward. Energy is thus being invested in the ball's surface. What the ball does with this energy depends on the ball. If the ball is an egg, the denting shatters the egg and the energy is wasted in the process of scrambling the egg's innards. But in virtually any normal ball, some or most of the work done on the ball's surface is stored in the elastic forces within the ball—this elastic potential energy, like all potential energies, is stored in forces. This stored energy allows the surface to undent and do work on other things in the process. During the rebound, the ball's surface undents. Although it's a little tricky to follow the exact flow of energy during the rebound, the elastic potential energy in the dented ball becomes kinetic energy in the rebounding ball. But even the best balls waste some of the energy involved in denting their surfaces. That's why balls never bounce perfectly and never return to their original heights when dropped on a hard, stationary surface. Some balls are better than others at storing and returning this energy, so they bounce better than others.

1338. How can a ball create thermal energy or "get hotter"?
When a ball bounces, some of its molecules slide across one another rather than simply stretching or bending. This sliding leads to a form of internal sliding friction and sliding friction converts useful energy into thermal energy. The more sliding friction that occurs within the ball, the less the ball stores energy for the rebound and the worse the ball's bounce. The missing energy becomes thermal energy in the ball and the ball's temperature increases.

1339. How do anti-lock brake systems work?
If you brake your car too rapidly, the force of static friction between the wheels and the ground will become so large that it will exceed its limit and the wheels will begin to skid across the ground. Once skidding occurs, the stopping force becomes sliding friction instead of static friction. The sliding friction force is generally weaker than the maximum static friction force, so the stopping rate drops. But more importantly, you lose steering when the wheels skid. An anti-lock braking system senses when the wheels suddenly stop turning during braking and briefly release the brakes. The wheel can then turn again and static friction can reappear between the wheel and the ground.

1340. If ball bearings create no friction, why do bearings have bearing grease as an essential ingredient?
Actually, some bearings are dry (no grease or oil) and still last a very long time. The problem is that the idea touch-and-release behavior is hard to achieve in a bearing. The balls or rollers actually slip a tiny bit as they rotate and they may rub against the sides or retainers in the bearing. This rubbing produces wear as well as wasting energy. To reduce this wear and sliding friction, most bearings are lubricated.

www.HowEverythingWorks.org