|If I pinch a sheet of aluminized Mylar between two concentric circular rings and weight the middle of the sheet with water so that it sags into a curved shape, like a parabola, is there an adhesive such as fiberglass which I can adhere to the back surface to stiffen it so that I can make a giant reflective surface to serve as a solar collector? — AM, Weldon, CA
What a great idea! Mylar is DuPont's brand of PET film, where "PET" is Poly(ethylene terephthalate)—the same plastic used in most plastic beverage containers (look for "PET" or "PETE" in the recycling triangle on the bottom). PET isn't a particularly inert plastic and you shouldn't have any trouble gluing to it. To form a rigid structure, you need either a glassy plastic backing (one that is stiff and brittle at room temperature) or a stiff composite backing. I'd go with fiberglass—mount the Mylar in a large quilting or needlepoint frame, coat the back of the Mylar with the glass and epoxy mixture, invert it, weight it with water, and let it harden. Mylar doesn't stretch easily, so you'll get a very shallow curve and a very long focal length mirror. While the mirror will probably have some imperfections and a non-parabolic shape, it should still do a decent job of concentrating sunlight.